How to modify the wireless router

F.OR.TEC.ForumIl corso e-learning F.OR.TEC.How to modify the wireless router

This topic has 1 voice, contains 0 replies, and was last updated by  seventrust 377 giorni ago.

Viewing 1 post
Author Articoli
Author Articoli
13 aprile 2018 at 06:27 #129525

Post count: 14972

The operation of the login password and the [url=]Ce12816E Huawe I Cloudengine 12800 Series Data Center Core Switches[/url] access password is usually used by the TP-LINK router, so the following interface is standard with TP-LINK, and the initial login IP of TP-LINK is, and the login username and password are all admin

There are default access settings on the back of routers.

First connect the network (wired wireless can) and then log on the router (enter the router IP:TP-LINK in the browser window:, enter the login password):

1, modify the default login password (system tool – modify login password). (if you forget the login password, you can reset the router – the reset hole (reset) behind the router in the routers’ power state. About 10 seconds or so, when the indicator of the router’s face is completely destroyed and then the reset hole is released, that is to complete the router. Reset, restore factory status and reset router.

2, modify the wireless device name (SSID) [url=]Huawei S5348Tp Pwr Si 10 100 1000 Mbps 48 Port Layer 3 Network Switch[/url] Settings – basic settings) (only wired routers have, to restart the router to take effect, can be restarted by hand, can also be restarted in the menu: the system tool – restart the router)

3, modify the wireless password (wireless setting – wireless security settings) (that is, the WIFI password, only wired routers have, to restart the router to take effect, restart the same method)

4, see how many devices (including computers and mobile phones) connect to routers (including wireless and wired) and their MAC addresses (by counting the number of devices connected to the router, you can know if the router has been scratched).

5, check the local allocated IP and the MAC address (physical address) of the machine and the corresponding graph in 4.

6, set up internet account and so on [url=]Cisco 7609 Chassis W 2X Fan Mod 09 1X Pwr 53 2103 02 G0 69 1016 02 B0 New[/url] parameter -WAN port setup).

Viewing 1 post

You must be logged in to reply to this topic.