Dental porcelain furnace

F.OR.TEC.ForumIl corso e-learning F.OR.TEC.Dental porcelain furnace

This topic has 1 voice, contains 0 replies, and was last updated by  seventrust 136 giorni ago.

Viewing 1 post
Author Articoli
Author Articoli
8 novembre 2018 at 07:10 #131369

Post count: 14952

Step 1: Open the power switch and press ESC after 8-10 seconds self-examination. 2. Input the process of firing the porcelain powder into the computer of the porcelain stove and represent the program with the numbers. 3, before firing porcelain, the furnace should be preheated for 15-30 minutes at low temperature.
[url=]resistance Double shell structure high quality vertica split tube furnace[/url]
4. Put the piled porcelain teeth on the porcelain pallet and place them in the furnace. 5, press the number key to select the representative program, and start running according to the green (S) key. 6. After the operation of the program, the furnace is automatically raised and the porcelain teeth or metal are taken out to press the key to close the hearth.[url=]Vacuum Furnace For Tempering Annealing[/url]
Dental porcelain furnace maintenance 1, every time after the end of the work to clean the furnace. 2, regular maintenance. 3. When the porcelain-fused-to-metal furnace is not in use, the furnace should be closed, so as to prevent the furnace from absorbing moisture and affecting the vacuum. 4. Clean the furnace and use suction to remove dust. 5, use soft cloth to wipe the control panel and circuit board.
[url=]china supplier on sale factory price Medium Induction Vacuum Furnace[/url]

Viewing 1 post

You must be logged in to reply to this topic.